Survey of the occurrence of residues of methyl tertiary butyl ether (MTBE) in Dutch drinking water sources and drinking water

An indicative survey has been carried out in The Netherlands investigating the presence of methyl tertiary butyl ether (MTBE) in drinking water and the corresponding sources. In total, 71 different sites used for the preparation of drinking water in The Netherlands were sampled in two successive seasons in 2001 involving the analysis of 156 samples. (ground water (n = 88), surface water (n = 17), bank filtrate water (n = 6) and drinking water (n = 45)). To combine high sample throughput with high selectivity and sensitivity, off-line purge and trap for sampling and gas chromatography mass spectrometry equipped with an automated thermal desorption sampler (TDS-GC-MS) was selected as the preferred analytical methodology. The developed procedure enabled the analysis of at least 40 samples per day and provided a limit of quantification of 2 ng l(-1). In the first period 63 samples of raw water were analyzed. Concentrations ranged between < 10 ng l(-1) and 420 ng l(-1) with a median concentration below 10 ng l(-1). The second period was focused at the re-sampling of positive locations (MTBE > 10 ng l(-1)) and a few additional drinking water utilities of which both the raw and drinking water of the utilities were analyzed. The median concentration of MTBE in the selected set of drinking water samples was 20 ng l(-1) (n = 45). At one location MTBE was found at a level of 2900 ng l(-1) caused by point source contamination of the ground water (11 900 ng l(-1)). Special attention has been paid to the quality of the results by analyzing all samples in duplicate and the analysis of control samples during each series of analyses.     

Quantification of human amniotic fluid constituents by high resolution proton nuclear magnetic resonance (NMR) spectroscopy

We have investigated the ability of high-resolution proton NMR spectroscopy to provide a biochemical constituent screening of human amniotic fluid (AF). Proton NMR spectra were obtained at 300 MHz on AF from patients undergoing amniocentesis in the mid-trimester. Only AF from normal pregnancies (normal fetal karyotype, normal a-fetoprotein levels, normal birth outcome) was used in this study. The AF supernatant was lyophilized and resuspended in deuterated water containing 0.1 mm phosphate buffer and 6.02 mm disodium maleate. Identification of low molecular weight compounds was confirmed by two-dimensional NMR spectra (primarily correlated spectroscopy, or COSY) and standard addition techniques. A broad profile of compounds were ‘NMR visible’ in a single proton spectrum, including creatinine, glucose, organic acids (acetate, citrate, and lactate) and several amino acids (alanine, histidine, leucine, phenylalanine, tyrosine and valine). The proton spectrum was unaffected by prior freezing/thawing of AF samples. We were able to quantify compounds by comparison with an added concentration standard (maleate) at concentrations as low as 30 μm. Good agreement with literature values based on other analytical techniques was obtained.     

CATCH:一种结构讨论方法,一件决策支持工具

引言 人类活动导致了水资源的过度开发和污染.<水框架指令>(WFD,2000/60/EG)就是为确保水资源的可持续利用、确保水资源的效果而拟定的.为达到WFD所概括的目标,一项明显的内容是:水资源的管理中要有各利益方的参与.把各利益方吸纳进来是一个重要步骤,可确保流域管理计划的发展考虑当地的经验,并且考虑这些计划对当地利益的影响.     

Reduction of Baltic Sea Nutrient Inputs and Allocation of Abatement Costs Within the Baltic Sea Catchment

The Baltic Sea Action Plan (BSAP) requires tools to simulate effects and costs of various nutrient abatement strategies. Hierarchically connected databases and models of the entire catchment have been created to allow decision makers to view scenarios via the decision support system NEST. Increased intensity in agriculture in transient countries would result in increased nutrient loads to the Baltic Sea, particularly from Poland, the Baltic States, and Russia. Nutrient retentions are high, which means that the nutrient reduction goals of 135 000 tons N and 15 000 tons P, as formulated in the BSAP from 2007, correspond to a reduction in nutrient loadings to watersheds by 675 000 tons N and 158 000 tons P. A cost-minimization model was used to allocate nutrient reductions to measures and countries where the costs for reducing loads are low. The minimum annual cost to meet BSAP basin targets is estimated to 4.7 billion €.     

Relative Importance of School Bus-Related Microenvironments to Children’s Pollutant Exposure

Abstract

Real‐time concentrations of black carbon, particle‐bound polycyclic aromatic hydrocarbons, nitrogen dioxide, and fine particulate counts, as well as integrated and real‐time fine particulate matter (PM_2.5) mass concentrations were measured inside school buses during long commutes on Los Angeles Unified School District bus routes, at bus stops along the routes, at the bus loading/unloading zone in front of the selected school, and at nearby urban “background” sites. Across all of the pollutants, mean concentrations during bus commutes were higher than in any other microenvironment. Mean exposures (mean concentration times time spent in a particular microenvironment) in bus commutes were between 50 and 200 times greater than those for the loading/unloading microenvironment, and 20–40 times higher than those for the bus stops, depending on the pollutant. Although the analyzed school bus commutes represented only 10% of a child’s day, on average they contributed one‐third of a child’s 24‐hr overall black carbon exposure during a school day. For species closely related to vehicle exhaust, the within‐cabin exposures were generally dominated by the effect of surrounding traffic when windows were open and by the bus’s own exhaust when windows were closed. Low‐emitting buses generally exhibited high concentrations only when traveling behind a diesel vehicle, whereas high‐emitting buses exhibited high concentrations both when following other diesel vehicles and when idling without another diesel vehicle in front of the bus. To reduce school bus commute exposures, we recommend minimizing commute times, avoiding caravanning with other school buses, using the cleanest buses for the longest bus routes, maintaining conventional diesel buses to eliminate visible emissions, and transitioning to cleaner fuels and advanced particulate control technologies as soon as possible.     

Effects of soil properties on food web accumulation of heavy metals to the wood mouse (Apodemus sylvaticus)

Effects of soil properties on the accumulation of metals to wood mice (Apodemus sylvaticus) were evaluated at two sites with different pH and organic matter content of the soil. pH and organic matter content significantly affected accumulation of Cd, Cu, Pb and Zn in earthworms and vegetation. For Cd, Cu and Zn these effects propagated through the food web to the wood mouse. Soil-to-kidney ratios differed between sites: Cd: 0.15 versus 3.52, Cu: 0.37 versus 1.30 and Zn: 0.33-0.83. This was confirmed in model calculations for Cd and Zn. Results indicate that total soil concentrations may be unsuitable indicators for risks that metals pose to wildlife. Furthermore, environmental managers may, unintentionally, change soil properties while taking specific environmental measures. In this way they may affect risks of metals to wildlife, even without changes in total soil concentrations.     

Characterising the landscape of state environmental review policies and procedures in the United States: a national assessment

Following the intent of the National Environmental Policy Act of 1969, many states have adopted policies and procedures directing state agencies and local government units to evaluate the potential environmental impacts of development projects prior to their undertaking. In contrast to a rich literature on federal requirements, current understanding of state environmental review is narrowly focused and outdated. This paper seeks to provide information on the landscape of state environmental review policy frameworks. The paper identifies 37 states with formal environmental review requirements through a document review of state statutes, administrative rules and agency-prepared materials, and confirms this finding through a survey of state administrators. A two-tier classification is used to distinguish states based on the approach taken to address environmental review needs and the scope and depth of relevant policies and procedures implemented. This paper also provides a discussion of policy and programme attributes that may contribute to effective practice, and of the potential for adopting relevant legislation in states where environmental review is currently lacking.     

The Impacts of Different Meteorology Data Sets on Nitrogen Fate and Transport in the SWAT Watershed Model

In this study, we investigated how different meteorology data sets impacts nitrogen fate and transport responses in the Soil and Water Assessment Tool (SWAT) model. We used two meteorology data sets: National Climatic Data Center (observed) and Mesoscale Model 5/Weather Research and Forecasting (simulated). The SWAT model was applied to two 10-digit hydrologic unit code watersheds in the Coastal Plain and Piedmont zones of North Carolina. Nitrogen cycling and loading response to these meteorological data were investigated by exploring 19 SWAT nitrogen outputs relating to landscape delivery, biogeochemical assimilation, and atmospheric deposition. The largest difference in model output using both meteorology data sets was for large loads/fluxes. Landscape delivery outputs (e.g., NO^? ₃ watershed discharge, groundwater NO^? ₃ flux, soil NO^? ₃ percolation) showed the largest difference across all values. Use of the two weather data sources resulted in a nearly twofold difference in NO^? ₃ watershed discharge and groundwater NO^? ₃ flux. Differences for many nitrogen outputs were greater than those for sub-basin flow. Nitrogen outputs showed the greatest difference for agricultural land covers and there was no flow-related pattern in output differences across sub-basins or over time (years). In general, nitrogen parameter models that had a greater number of nitrate concentration, flow, and temperature terms (equation variables) in each transport model showed the greatest difference between both meteorology applications.     

Use of CALPUFF for exposure assessment in a near-field,complex terrain setting

CALPUFF is an atmospheric source-receptor model recommended by the U.S. Environmental Protection Agency for use on a case-by-case basis in complex terrain and wind conditions. The ability of the model to provide useful information for exposure assessments in areas with those topographical and meteorological conditions has received little attention. This is an important knowledge gap for use of CALPUFF outside of regulatory applications, such as exposure analyses conducted in support of risk assessments and health studies. We compared deposition of cadmium (Cd), lead (Pb), and zinc (Zn) calculated with CALPUFF as a result of emissions from a zinc smelter with corresponding concentrations of the metals measured in attic dust and soil samples obtained from the surrounding area. On a point-by-point analysis, predictions from CALPUFF explained 11% (lead) to 53% (zinc) of the variability in concentrations measured in attic dust. Levels of heavy metals in soil interpolated to 100 residential addresses from the distribution of concentrations measured in soil samples also agreed well with deposition predicted with CALPUFF: R² of 0.46, 0.76, and 079 for Pb, Cd, and Zn, respectively. Community-average concentrations of Cd, Pb, and Zn measured in soil were significantly (p < 0.0001) and strongly correlated (R² ranged from 0.77 to 0.98) with predicted deposition rates. These findings demonstrate that CALPUFF can provide reasonably accurate predictions of the patterns of long-term air pollutant deposition in the near-field associated with emissions from a discrete source in complex terrain. Because deposition estimates are calculated as a linear function of air concentrations, CALPUFF is expected to be reliable model for prediction of long-term average, near-field ambient air concentrations in complex terrain as well.     

Factors Influencing the Emissions of Nitrated-Polynuclear Aromatic Hydrocarbons(Nitro-PAH) from Diesel Engines

The potential problem of 1-nitropyrene (1-NP) formation during filter sampling of diesel emissions from dilution tubes is assessed. Rates of formation are calculated using data generated from several independent filter exposure studies. A portion of the 1-NP (12% average) found in participates collected from light-duty (LDD) and heavy-duty diesels (HOD) was found to be due to formation on the filter under average sampling conditions of 10-15/1 dilution at 44°C with 3 ppm NO₂ for 23 min. On the average, the concentration of 1-NP in participates emitted from HDD is 16 times less than that found in LDD run under similiar transient conditions. The average emission rate of 1-NP generated from the LDD and HDD was 4.7 μg/km and 1.5 μg/km, respectively for the vehicles operating under Federal Test Procedure (FTP)-transient conditions. Under operating conditions which increase exhaust temperature (increased speed and load), the concentration of nitro-PAH is significantly reduced with a concurrent increase in the concentration of partially oxidized nitro-PAH and dinitro-PAH. The concentration of 1-NP in the particulates measured from HDD in these dilution tube studies (0.33-0.95 ppm, depending upon engine load) is comparable to that measured in highway tunnel experiments (0.54 ppm average).